Leoclean Industrial

Leoclean Industrial is a heavy duty cleaner designed to remove bitumen and asphalt grease from all types of equipment used by Highways Contractors. It has been formulated so that when applied it will leave a non-slip coating that will help prevent material from adhering to the surface of the equipment used.

Leoclean Industrial is a cleaner and degreaser, formulated from derivatives of vegetable oils with a flash point in excess of 90°C.

Leoclean Industrial can replace red diesel as well as chlorinated and paraffin based solvents in most applications.

WHERE TO USE?

Leoclean Industrial is suitable for most surfaces. It is completely safe on all metals, most composite plastics, ceramics, most acrylics, concretes, brick, stone, glass, wood and painted surfaces. It will also not affect any cured resins or vulcanized rubber. Care must be taken on porous surfaces as Leoclean Industrial will tend to allow absorption of the contaminant into the surface.

APPLICATION

Leoclean Industrial should be applied sparingly onto the affected area and allowed
to soak into the contaminant. The softened
or dissolved residue should then be removed with absorbent material. Repeat the process if necessary. Remove softened residue off porous surfaces as soon as possible to reduce the risk of any absorption and wash with soapy water. Leoclean Industrial has a slower evaporation rate than chlorinated solvent. Where production processes require speed, drying can be enhanced by heat and/or hot air (but not naked flames) and/or vacuum.

COVERAGE

The concentrated nature of Leoclean Industrial means that it should be used sparingly.